Custom-Made Pump Kleen®
Pumpout Boats & Floating Restrooms
Marine Boatbuilders Company specializes in designing and manufacturing custom made Pump Kleen® 26' pumpout boats. Our 26 foot pumpout boats are built for safety, simplicity and stability. Our unique PUMP KLEEN® System offers many benefits over our competitor's pumpout boats. In addition, our boats are not made with wood, not in the hull, not in the deck, not in the transom.
We are especially pleased to announce our new
MB1100 26' Pump Kleen® Pumpout Boat. click here to view photos
The hull is constructed with a combination of hand laid woven, roving, and gun roving. All fiberglass is “E” glass and the resin is thermo set polyester. The gelcoat is ISO NPG thermo set gelcoat, normally 0.30” thick. Our pumpout boat has a 24-degree dead rise at the stern, and a 12-degree transom angle. The hull transom is a composite laminate 1.5” thick, and 1” fiberglass a total of 3” thick. There is no wood in the transom.
Our stringer system is a U channel all fiberglass state of the art system. There is no wood in our stringer system.
The deck is a combination of hand laid woven, roving, and gun roving. Fiberglass “E” glass applied and the resin is thermostat gelcoat (white). Deck has a 12” step up in the bow area that is 48” long. It includes two forward large stowage areas with fiberglass hatches. The deck is free from any pumps, vents, or pipes of any kind leaving much-needed extra workspace, and NO trip hazards. Our floor is fiberglass composite, not wood like other boats there is NO wood in our deck, floor or in our boat. The deck is finished with non-skid on horizontal surfaces. Our deck is self-bailing at all times; weather containment cell is full or empty.
Two-part thermostat foam is injected between the floor and hull in areas not occupied by tankage and other equipment.
Only storm and blister resistant gelcoats are used to form the skin of each Pumpout Boat, a wide variety of colors are available. White is our standard color included in the quote price; other color choices would be extra cost.
Two-part thermostat foam is injected between the floor and hull in areas not occupied by tankage and other equipment. The fuel tank is 78 gallons and located below the deck.
A built in 650 gallon fiberglass holding tank below the water line, is a standard feature on our 26’ PUMPOUT BOAT. The containment cell has 5 layers of fiberglass that include 4 layers of 24 oz. Cloth. Our containment cell has 5 athwartship baffles. The Edson pump that runs the sewage tank is located completely under the center console. In addition, under the console is the intake, and discharge pipes. Leaving the entire deck free to any trip hazards and much needed additional working space. The vent is located outside the starboard hull. The tank has an alarm that sounds when tank is full.
Warranty - 26' Pumpou Boat
Marine BoatBuilders Company offers a five (5) year warranty on the hull and a 5-year warranty on the holding tank. This warranty applies as long as the boat is used as a Pumpout boat only.
Call Marine Boat Builders today for a 26 ft Pumpout Boat Quote at 401-732-1975 or complete our brief quote request form.
©2012 Marine Boatbuilders Company, Warwick RI | firstname.lastname@example.org | 401.732.1975