PUMP KLEEN®

Custom-Made Pump Kleen®
Pumpout Boats & Floating Restrooms

Warwick, Rhode Island
401-732-1975

like Marine BoatBuilders on Facebook     

26' Pumpout Boats | 26 Ft Custom Made Pumpout Boat by Marine Boatbuilders Company 401-732-1975

Marine Boatbuilders Company specializes in designing and manufacturing custom made Pump Kleen® 26' pumpout boats. Our 26 foot pumpout boats are built for safety, simplicity and stability. Our unique PUMP KLEEN® System offers many benefits over our competitor's pumpout boats. In addition, our boats are not made with wood, not in the hull, not in the deck, not in the transom.

We are especially pleased to announce our new
MB1100 26' Pump Kleen® Pumpout Boat. click here to view photos

  • 1100 gallon holding tank capacity
  • USCG stability test provided
  • T-top / pilot house optional
  • Additional details available upon request

Modified V Hull Design - 26' Pumpout Boat

The hull is constructed with a combination of hand laid woven, roving, and gun roving. All fiberglass is “E” glass and the resin is thermo set polyester. The gelcoat is ISO NPG thermo set gelcoat, normally 0.30” thick. Our pumpout boat has a 24-degree dead rise at the stern, and a 12-degree transom angle. The hull transom is a composite laminate 1.5” thick, and 1” fiberglass a total of 3” thick. There is no wood in the transom.

Stringer System - 26' Pumpout Boat

Our stringer system is a U channel all fiberglass state of the art system. There is no wood in our stringer system.

Deck, Floor - 26' Pumpout Boat

The deck is a combination of hand laid woven, roving, and gun roving. Fiberglass “E” glass applied and the resin is thermostat gelcoat (white). Deck has a 12” step up in the bow area that is 48” long. It includes two forward large stowage areas with fiberglass hatches. The deck is free from any pumps, vents, or pipes of any kind leaving much-needed extra workspace, and NO trip hazards.  Our floor is fiberglass composite, not wood like other boats there is NO wood in our deck, floor or in our boat. The deck is finished with non-skid on horizontal surfaces. Our deck is self-bailing at all times; weather containment cell is full or empty.

Foamed Flotation - 26' Pumpout Boat

Two-part thermostat foam is injected between the floor and hull in areas not occupied by tankage and other equipment.

Quality Gelcoat - 26' Pumpout Boat

Only storm and blister resistant gelcoats are used to form the skin of each Pumpout Boat, a wide variety of colors are available. White is our standard color included in the quote price; other color choices would be extra cost.

Fuel Tank - 26' Pumpout Boat

Two-part thermostat foam is injected between the floor and hull in areas not occupied by tankage and other equipment. The fuel tank is 78 gallons and located below the deck.

Containment Cell - 26' Pumpout Boat

A built in 650 gallon fiberglass holding tank below the water line, is a standard feature on our 26’ PUMPOUT BOAT.  The containment cell has 5 layers of fiberglass that include 4 layers of 24 oz. Cloth. Our containment cell has 5 athwartship baffles. The Edson pump that runs the sewage tank is located completely under the center console. In addition, under the console is the intake, and discharge pipes. Leaving the entire deck free to any trip hazards and much needed additional working space. The vent is located outside the starboard hull. The tank has an alarm that sounds when tank is full.

Other Standard 26' Pumpout Boat Features

  • T-Top hard top
  • Running lights. S/S Pop Up
  • Stainless steel bow eye and transom tie-downs. S/S pop up
  • Two 3” scuppers.
  • Heavy-duty rub rail.
  • 1100 G.P.M. automatic bilge pump.
  • (7) 10” stainless steel cleats pop-up cleats
  • The Cleat, chalks, and running lights in the bow are Stainless Steel Pop up
  • (6) mushroom cleats on inside of gunwale
  • Ritchie compass
  • Two deep cycle series batteries.
  • (1) Non-feed back battery switch.
  • Water wash down pump.
  • Stowage areas with doors.
  • Matching set of doors.
  • Seat in front of center console with stowage
  • All round fender system
  • Hydraulic steering (of course.)
  • Stainless Steel Bow Rail

26 ft Pumpout Boat Specifications:

  • Overall length: 26’
  • Beam: 9’11”
  • Draft: 19” lightship; 24” full load
  • Dead rise: 24 degrees
  • Transom angle: 12 degrees
  • Weight :( LIGHTSHIP) 4,800 POUNDS
  • Weight: (FULL LOAD) 9,800 POUNDS
  • HP rating: 500 HP
  • MINIMUM ENGINE: 2 X 150HP
  • Freeboards: 44” forward, 27” aft.
  • Engine: Minimum 1X 225 HP

Warranty - 26' Pumpout Boat
Marine BoatBuilders Company offers a five (5) year warranty on the hull and a 5-year warranty on the holding tank. This warranty applies as long as the boat is used as a Pumpout boat only.


Call Marine Boat Builders today for a 26 ft Pumpout Boat Quote at 401-732-1975 or complete our brief quote request form.

Loading...
Previous | Next

©2014 Marine Boatbuilders Company, Warwick RI  |  rickjr@marineboatbuilders.com  |  401.732.1975


Home  |  About Us  |  Our Boats  |  Resources  |  News   |  Get a Quote  |  Contact Us

19' Pumpout Boats  |  20' Pumpout Boats  |  23' Pumpout Boats  |  26' Pumpout Boats  |  31' Pumpout Boats  | 

Used Pumpout Boats  |  19' Patrol Boats  |  23' Patrol Boats  |  ADA Compliant Floating Restrooms

Website Designed by AQ  |  Website Admin  |  Sitemap  |  Copyright 2014

write a review on Google Placeslike Marine BoatBuilders on Facebook