31' Pumpout Boats

We are pleased to introduce our new, 31’ PUMPOUT BOAT. This is our third generation new mold. Built and designed from our 15 years of experiences building PUMPOUT boats, Work boats, and Patrol boats. Our boats are built for safety, simplicity, and stability.

MODIFIED V HULL DESIGN
The hull is constructed with a combination of hand laid woven, roving, and gun roving. All fiberglass is "E" glass and the resin is thermo set polyester. The gelcoat is ISO NPG thermo set gelcoat, normally 0.30" thick. Our boat has a 21-degree dead rise at the stern, and a 12-degree transom angle. The hull transom is a composite laminate 2" thick, and 1" fiberglass a total of 3" thick. There is no wood in the transom.

STRINGER SYSTEM
Our stringer system is a U channel all fiberglass state of the art system. There is no wood in our stringer system.

Deck, Floor
The deck is a combination of hand laid woven, roving, and gun roving. Fiberglass "E" glass applied and the resin is thermostat gelcoat (white). Deck has a 12" step up in the bow area that is 48" long. It includes two forward large stowage areas with fiberglass hatches. The deck is free from any pumps, vents, or pipes of any kind leaving much-needed extra workspace, and NO trip hazards. Our floor is fiberglass composite, not wood like other boats there is NO wood in our deck, floor or in our boat. The deck is finished with non-skid on horizontal surfaces. Our deck is self-bailing at all times; weather containment cell is full or empty.

FOAMED FLOTATION
Two-part thermostat foam is injected between the floor and hull in areas not occupied by tankage and other equipment.

Pilot House
A Pilot House with glass windshield and sides, along with an enclosed Center console is standard on our 31’.

FUEL TANK
The fuel tank is 100 gallons and located below the deck.

CONTAINMENT CELL
A built in 950 gallon fiberglass holding tank below the water line, is a standard feature on our 31’ PUMPOUT BOAT. The containment cell has 5 layers of fiberglass that include 4 layers of 24 oz. Cloth. Our containment cell has 5 athwartship baffles. The Edson pump that runs the sewage tank is located completely under the center console. In addition, under the console is the intake, and discharge pipes. Leaving the entire deck free to any trip hazards and much needed additional working space. The vent is located outside the starboard hull. The tank has an alarm that sounds when tank is full.

OTHER STANDARD FEATURES

1. Pilot House with glass windshield and windows on port, and starboard side. Large size center console enclosed in Pilot house,
2. T-Top hard top
3. Running lights.
4. Stainless steel bow eye and transom tie-downs.
5. Two 3" scuppers.
6. Heavy-duty rub rail.
7. 1100 G.P.M. automatic bilge pump.
8. (7) 10" stainless steel cleats pop-up cleats
9. The Cleat, chalks, and running lights in the bow are Stainless Steel Pop ups.
10. Ritchie compass
11. Two deep cycle series batteries.
12. (1) Non-feed back battery switch.
13. Water wash down pump.
14. Stowage areas with doors.
15. Matching set of doors.
16. Seat in front of center console with stowage
17. All round fender system
18. Hydraulic steering (of course.)
19. Stainless Steel Bow Rail
20. Tow Bar

SPECIFICATIONS
Overall length: 31’
Beam: 11’1 1/2"
Draft: 18 1/2" lightship; 2224 1/2" full load
Dead rise: 24 degrees
Transom angle: 12 degrees
Weight :( LIGHTSHIP) 7250 POUNDS
Weight: (FULL LOAD) 14,850 POUNDS
HP rating: 500 HP
MINIMUM ENGINE 2 X 150HP
Freeboards: 44" forward, 27" aft.

Engine

• Two (2) 200HP Mercury Counter rotating Four strokes
• WARRANTY

We offer a five (5) year warranty on the hull and a 5-year warranty on the holding tank. This warranty applies as long as the boat is used as a Pumpout boat only.

Optional Equipment:

• Engines of your choice
• Search lights
• Electronics
• Anything you may want to add